Tài liệu kỹ thuật

Hướng dẫn bằng tiếng Việt · 3

• Cách chọn máy khoan và ta rô cho chi tiết của bạn
• Cần gửi thông tin gì để nhận báo giá máy khoan và ta rô
• Máy tarô truyền động bánh răng và servo: lựa chọn và phạm vi báo giá

Hướng dẫn bằng tiếng Anh · 210

Chúng tôi dịch hướng dẫn theo từng đợt. Các bài viết còn lại hiện có bằng tiếng Anh.

• Multi-Spindle Drilling: Hole Pattern and Fixture RequirementsEnglish
• Horizontal Double-Head Drilling: Is It Suitable for Your Part?English
• When to Use a Servo-Traverse Drilling and Tapping MachineEnglish
• Does an Automatic Tapping Machine Include Automatic Feeding?English
• Can Your Part Be Bowl-Fed for Automatic Tapping?English
• Rotary Indexing Drilling and Tapping: How the Stations WorkEnglish
• Multi-Side Drilling and Tapping: Layout and Clamping ConsiderationsEnglish
• Dedicated Drilling and Tapping Machine vs CNC Machining CenterEnglish
• Automatic Drilling and Tapping Machine Price: How to BudgetEnglish
• Blind-Hole Tapping Machine Selection: Depth, Tooling and AcceptanceEnglish
• Single-Spindle vs Multi-Spindle Drilling: Compare the Complete ProcessEnglish
• Planning Changeovers for a Family of Drilled and Tapped PartsEnglish
• Semi-Automatic vs Fully Automatic Drilling and Tapping: Define the Handling ScopeEnglish
• Drawing Review for Drilling and Tapping: Datums, Tolerances and RevisionsEnglish
• How to Plan a Sample-Part Trial for a Drilling and Tapping MachineEnglish
• Drilling and Tapping Machine Acceptance: A Buyer's Inspection ChecklistEnglish
• Preparing Your Factory for a Drilling and Tapping MachineEnglish
• Two-End Drilling: Part Length, Location and Hole RelationshipsEnglish
• Drilling and Tapping on Different Faces: One Fixture or Separate Setups?English
• Rotary Indexing vs Servo Traverse: Comparing Machine LayoutsEnglish
• Drilling, Chamfering and Tapping: Define the Included SequenceEnglish
• Manual Loading vs Bowl Feeding: Choosing a Part-Handling ApproachEnglish
• Chip Removal and Cleaning: Define the Scope of Your Machining CellEnglish
• Comparing Drilling and Tapping Machine Quotations Line by LineEnglish
• Tooling, Spare Parts and Documentation: Plan the Machine HandoverEnglish
• Thin-Wall Parts: What to Review Before Quoting a Drilling or Tapping FixtureEnglish
• Drilling and Tapping Cast Parts: Define the Incoming Blank Before the MachineEnglish
• Cross-Hole Drilling: Review Tool Access and Internal Feature RequirementsEnglish
• Small Batches and Many Variants: When Does a Dedicated Machine Fit?English
• From Order Volume to Drilling and Tapping Output RequirementsEnglish
• Manual Loading Now, Automation Later: Define the Upgrade ScopeEnglish
• Machine Detection vs Dimensional Inspection: Assign the ResponsibilitiesEnglish
• After the Quotation: Managing Drawing and Production ChangesEnglish
• Long-Profile Multi-Hole Drilling: Map Full-Length Coverage and SupportEnglish
• Different Thread Sizes on One Part: Define the Tapping ConfigurationEnglish
• Feeding Parts with Cosmetic Requirements: Review Every Contact and TransferEnglish
• Machining Left- and Right-Hand Parts: Define Identification and Fixture CoverageEnglish
• Tapping Pre-Drilled Parts: Define the Incoming Hole and Delivery ScopeEnglish
• Adding a Drilling and Tapping Machine to an Existing Production LineEnglish
• Machine Operator Training: What to Define Before PurchaseEnglish
• Requesting a Machining Equipment Proposal Before the Drawing Is FinalEnglish
• Changing a Hole Pattern: What Needs Review Beyond the Multi-Spindle Head?English
• Large-Part Drilling and Tapping: Review the Part, Carrier and Loading EnvelopeEnglish
• Drilling and Tapping Before or After Surface Treatment: Define the Process BoundaryEnglish
• Several Parts in One Fixture: Compare Complete Output, Not Just Nest CountEnglish
• Machine Lead Time: Define the Start Date and Delivery MilestonesEnglish
• Remote Machine Trials: Request Evidence You Can Trace to the PartsEnglish
• Buyer-Supplied Tooling: Define Compatibility and Machine ScopeEnglish
• From Successful Samples to Production: Close the Machining Handover GapsEnglish
• Square and Rectangular Tube Drilling: One Wall, Two Walls or Multiple Faces?English
• Angled-Hole Drilling: Define the Axis and Part References Before Selecting EquipmentEnglish
• Small-Part Drilling and Tapping: Define Presentation, Identity and CollectionEnglish
• Drilling and Tapping Existing Parts: Define Rework Inputs and Engineering ReleaseEnglish
• Maintenance Access: Questions to Resolve Before Approving a Machine LayoutEnglish
• Tooling and Consumables: Build a Comparable Running-Cost RecordEnglish
• Part Traceability: Define the Records Before Specifying the MachineEnglish
• Sending Sample Parts: Prepare an Inventory That Supports the Machine ReviewEnglish
• Drilling and Tapping Stamped Parts: Define the Incoming Shape and Process BoundaryEnglish
• Drilling and Tapping Welded Assemblies: Review the Complete Incoming ComponentEnglish
• Drilling and Tapping Parts with Inserts or Bushings: Define What Must Remain UnchangedEnglish
• Flange Hole Patterns: Define Position References Before Comparing Drilling ArrangementsEnglish
• Machine Utilities: What Factory Information Belongs in Your Inquiry?English
• Machining Fluids: Define the Equipment and Supply BoundaryEnglish
• Technical Support Requests: Agree the Information and Responsibilities Before PurchaseEnglish
• Replacing a Drilling and Tapping Machine: Build a Transfer and Change RecordEnglish
• Valve Body Drilling and Tapping: Prepare a Feature-by-Feature InquiryEnglish
• Motor Housing Drilling and Tapping: Connect Mounting Features to Assembly ReferencesEnglish
• Hinge and Bracket Drilling: Define Paired Features and Assembly ReferencesEnglish
• Electrical Terminal Parts: Define the Hole and Thread Machining ScopeEnglish
• Part Presence and Orientation: Define What the Machine Must ConfirmEnglish
• Finished-Part Discharge: Define Where Machining Ends and Collection BeginsEnglish
• After a Tool Change: Define First-Part Verification Before PurchaseEnglish
• Machine Quote Options: Build a Clear Base-and-Options Selection TableEnglish
• Pump Housing Drilling and Tapping: Define the Incoming Stage and Assembly InterfacesEnglish
• Furniture Connector Drilling and Tapping: Keep Kit Versions and Hole Relationships ClearEnglish
• Heat Sink Drilling and Tapping: Review Mounting Holes Around Fins and Finished FacesEnglish
• Bearing Support Drilling and Tapping: Protect Existing Seats and Define Mounting ReferencesEnglish
• When Drawings, 3D Models and Samples Disagree: A Quotation Clarification RegisterEnglish
• Part-Family Coverage: Choose Representative and Boundary Parts for a Dedicated MachineEnglish
• Interrupted Machining: Define the Status and Destination of Unfinished PartsEnglish
• Machine Delivery Documents: Link Each Revision to the Supplied ConfigurationEnglish
• Manifold Block Drilling and Tapping: Separate Port Machining, Closure and CleaningEnglish
• Coupling Part Drilling and Tapping: Relate Radial Threads to Axial FeaturesEnglish
• Lock Hardware Drilling and Tapping: Define Component Versions and Assembly BoundariesEnglish
• Mounting Plate Drilling and Tapping: Map Mixed Features, Plate Faces and Outside OperationsEnglish
• Custom Fixture Purchasing: Define Hardware, Drawings and Repeat-Order DeliverablesEnglish
• Buyer and Supplier Measurement Results: Agree Gauges, Methods and Comparison RecordsEnglish
• Machine Packaging and Receiving: Connect Each Package to the Delivery ScopeEnglish
• Buying a Second Drilling and Tapping Machine: Review What Must Match and What May ChangeEnglish
• Pneumatic Cylinder End-Cap Drilling and Tapping: Identify Tie-Rod Holes, Ports and Cover OrientationEnglish
• Gearbox Cover Drilling and Tapping: Connect Bolt Patterns, Dowel Features and Mating-Part InformationEnglish
• Instrument Enclosure Drilling and Tapping: Define Face Versions, Finish and Assembly StateEnglish
• Machined Spacer and Standoff Drilling: Define End Identity, Axial Holes and Side ThreadsEnglish
• Same Drawing, Different Material: Recheck the Machining Quotation ScopeEnglish
• Tray and Carrier Interfaces: Define How Parts Arrive at the MachineEnglish
• Machine Project Open Items: Track Decisions Through Evidence and ClosureEnglish
• Machining Trial Report: Connect Results to Samples, Configuration and LimitsEnglish
• Conveyor Component Drilling and Tapping: Turn an Assembly List into Separate Machining TasksEnglish
• Sensor Mount Drilling and Tapping: Separate Orientation, Adjustment Features and Finished ReferencesEnglish
• Lighting Housing Drilling and Tapping: Define Cover, Base and Assembly-Hole ResponsibilitiesEnglish
• Fixture Base Drilling and Tapping: Separate Locating Features from Mounting ThreadsEnglish
• Hole Depth and Usable Thread Depth: Align the References Before QuotingEnglish
• Machine Recipes and Programs: Define the Delivery Scope by Part RevisionEnglish
• Mixed Incoming Batches: Define What a Container Is Allowed to ContainEnglish
• Machine Acceptance Open Actions: Connect Each Finding to Retest EvidenceEnglish
• Shaft Collar Drilling and Tapping: Separate Clamping Features from Existing BoresEnglish
• Door Closer Body Drilling and Tapping: Define External Mounting Work and Internal BoundariesEnglish
• Pulley Hub Drilling and Tapping: Define Radial Threads against the Existing Bore and KeywayEnglish
• Machine Handwheel Drilling and Tapping: Separate Hub, Rim and Handle FeaturesEnglish
• Compare Quoted Drilling and Tapping Cycle Times on the Same BasisEnglish
• Prepare a Useful Machine RFQ Without Sharing Unnecessary Commercial InformationEnglish
• Identify a Machine Spare Part Before Requesting a Replacement QuoteEnglish
• Document Incoming Part Variation for a Drilling and Tapping Machine ReviewEnglish
• Linear Rail Support Drilling and Tapping: Define Mounting Holes and Purchased Rail InterfacesEnglish
• Cable Gland Plate Drilling and Tapping: Separate Through Openings from Threaded InterfacesEnglish
• Adjustable Foot Component Machining: Separate Bases, Rods and Threaded FeaturesEnglish
• Machining Stop Block Drilling and Tapping: Separate Contact Faces from Fixing ThreadsEnglish
• Agree Units and Counting Conventions Before Comparing Machine QuotationsEnglish
• Track Retained, Returned and Consumed Parts After a Machining TrialEnglish
• Use Supplied Screws as Assembly References in a Tapping Machine InquiryEnglish
• Photograph a Workpiece Clearly for a Drilling and Tapping Machine InquiryEnglish
• Clamping Jaw Drilling and Tapping: Separate Mounting Threads from Contact FacesEnglish
• Inspection Gauge Body Machining: Separate Fixing Holes from Measurement ReferencesEnglish
• Industrial Handle Mount Drilling: Identify Blind Ends and Paired InterfacesEnglish
• Roller Support Bracket Machining: Separate Shaft Features from Mounting HolesEnglish
• Machine RFQ Response Matrix: Distinguish Confirmed Scope, Conditions and Missing AnswersEnglish
• Machining Trial Witness Plan: Agree the Agenda, Review Points and Decision OwnersEnglish
• Label Drilling and Tapping Features So Every Quotation Reply Refers to the Same HoleEnglish
• Machine Inquiry Decision Roles: Hand Over Drawings, Quality Requirements and Production Assumptions ClearlyEnglish
• Tensioner Block Drilling and Tapping: Separate Adjustment, Locking and Guide FeaturesEnglish
• End-Effector Adapter Drilling: Keep Tool-Side and Mounting-Side Interfaces IdentifiableEnglish
• Indexing Disc Hole Machining: Define Angular Zero, Face Direction and Pattern IdentityEnglish
• Split Housing Drilling and Tapping: Define Half-Pair Identity and Joint-Crossing FeaturesEnglish
• After a Machining Trial: Decide Where Every Sample GoesEnglish
• Review a Machine Layout with Comments That Can Be ResolvedEnglish
• Using Mating Parts in a Machining Review: Define What the Evidence ProvesEnglish
• When a Machine Quotation Assumption Needs a New ReviewEnglish
• Pivot Block Drilling and Tapping: Define the Pivot Bore Endpoint and Separate Fixing ThreadsEnglish
• Machine Cover Bracket Drilling: Identify Formed Parts, Mounting Holes and Appearance FacesEnglish
• Tool Holder Block Drilling and Tapping: Separate Supplied Seats from Fixing ThreadsEnglish
• Adjustment Knob Insert Machining: Define Bare Inserts, Embedded Parts and Thread ScopeEnglish
• Before a Machine Trial: Freeze the Inputs That Define the TestEnglish
• Check a Drilling and Tapping Quote for Missing OperationsEnglish
• Write Machine Project Meeting Notes That Preserve the Actual DecisionsEnglish
• Launching a Part Family: Decide Which Variants Need Evidence FirstEnglish
• Multi-Spindle Head Retrofit or Complete Drilling Machine?English
• Dedicated Tapping Machine or Tapping Arm: Which Fits the Work?English
• Drilling and Tapping Machine Quote: Compare Cost and InclusionsEnglish
• Dedicated Machine Break-Even Volume: A Worked Cost ComparisonEnglish
• Repeated Tap Breakage: What to Record Before Replacing the MachineEnglish
• Tapped-Hole Gauge Results Disagree: What to Review FirstEnglish
• Drilling and Tapping Machines for Aluminum: Alloy, Temper and Process ScopeEnglish
• Tapping Machines for Stainless Steel: Define a Representative TrialEnglish
• Horizontal or Vertical Drilling Machine: Start with the Part PositionEnglish
• Fixed or Adjustable Multi-Spindle Head: Compare the Actual Hole PatternsEnglish
• Outsource Machining or Buy a Machine: Compare the Same Delivered WorkEnglish
• Automation Payback: Separate Released Operator Time from Cash SavingsEnglish
• Drilling Exit Burrs: Define the Edge Requirement and Deburring ResponsibilityEnglish
• Drilled-Hole Position Variation: Separate Incoming-Part, Fixture and Process EvidenceEnglish
• Drilling and Tapping Machines for Brass: Grade, Blank and Clamping ReviewEnglish
• Copper Drilling and Tapping: Separate Machining Areas from Electrical Contact SurfacesEnglish
• Separate Drilling and Tapping Machines or One Combined System?English
• One Automatic Machine or Two Semi-Automatic Machines: Compare the Working SequenceEnglish
• Machining Cost per Good Part: Count Accepted Units OnceEnglish
• Allocate Fixture Cost Across a Part Family with Visible AssumptionsEnglish
• Drill Wandering at Entry: Build an Evidence Pack Before Changing EquipmentEnglish
• Multi-Spindle Drilling Consistency: Record Results by Hole and SpindleEnglish
• Copper Busbar Drilling: Separate Single Bars, Stacks and Coating StagesEnglish
• Cold Plate Drilling and Tapping: Mark Channel Boundaries and Test ResponsibilitiesEnglish
• Adding Dedicated Drilling Alongside a CNC: Which Operations Should Move?English
• Simultaneous or Sequential Hole Machining: Compare the Actual Feature GroupsEnglish
• How Changeover Frequency Affects Dedicated-Machine EconomicsEnglish
• Tapping Tool Cost per Good Part: Include Replacement and Rejected OutputEnglish
• Carbon Steel Drilling and Tapping: Define Hot-Rolled, Cold-Worked and Prepared StockEnglish
• Cast Iron Drilling and Tapping: Connect Cast Surfaces to Machined DatumsEnglish
• Aluminum Extrusion End Tapping: Map Cavities, Screw Ports and End ReferencesEnglish
• Aluminum Window Profile Drilling: Before or After Cutting?English
• Reusing Existing Fixtures on a New Drilling Machine: What Must Be Verified?English
• Add Automatic Loading to an Existing Machine or Buy a New Workstation?English
• When Orders Fall: Test a Machining Investment Against Three Demand ScenariosEnglish
• One Shift or Two Shifts: Compare Machining Capacity Before Choosing Machine QuantityEnglish
• Zinc Die Casting Tapping: Review Thin Walls, Existing Holes and Trial SamplesEnglish
• Plastic Tapping vs Threaded Inserts: Define the Joint Before Buying EquipmentEnglish
• Shower Hardware Drilling and Tapping: Fixture Small Parts Around Decorative SurfacesEnglish
• Pneumatic Fitting Drilling and Tapping: Map Ports, Intersections and Inspection OwnersEnglish
• A Screw Fits the Hole: Does That Mean the Thread Passes Inspection?English
• Chips Left Inside Deep Holes: Build a Feature-Level ReviewEnglish
• Tool Wear and Dimensional Drift: Build a Record That Supports Change DecisionsEnglish
• Missing Hole and Missing Thread Detection: Define What Each Check Must ProveEnglish
• Drilling and Tapping Before or After Heat Treatment: Define the Operation SequenceEnglish
• Incoming Hardness Variation: Connect Material Lots to Drilling and Tapping TrialsEnglish
• Motor Terminal Box Drilling and Tapping: Separate Mounting Holes, Entries and Assembly ChecksEnglish
• Die-Cast Cover Datum Review: Separate Ejector Marks, Ribs and Functional ReferencesEnglish
• Caster Bracket Holes Before or After Forming: Compare the Finished ForkEnglish
• Barrel Nut Machining: Connect the Cross-Hole, Thread and Orientation FeatureEnglish
• Dual-Servo Machine Video Review: Specify the Complete Cycle You Need to SeeEnglish
• Gear Tapping Video Review: Build a Part-to-Part Changeover RequestEnglish
• Horizontal Double-Head Video Review: What Is Visible and What Needs EvidenceEnglish
• Servo-Traverse Drilling and Tapping Video: Verify the Position MapEnglish
• Multi-Spindle Drilling Video: What It Shows and What to VerifyEnglish
• Rotary Indexing Machine Video: Build a Station and Part-State MapEnglish
• Automatic Feeding Video Review: From Visible Layout to Trial EvidenceEnglish
• Cut Taps vs Forming Taps: What Changes in the Machine Requirement?English
• Tapping vs Thread Milling: Which Machine Motions Does the Part Require?English
• Drilled Hole or Reamed Hole: When Does the Quote Need a Finishing Operation?English
• Spindle Torque vs Motor Power: Reading a Drilling and Tapping ProposalEnglish
• Spiral-Flute vs Spiral-Point Taps: Choose the Chip Exit Before the MachineEnglish
• Rigid, Synchronous and Compensating Tap Holders: What Must Match?English
• Cpk, Ppk or a Short Machine Trial: What Evidence Are You Buying?English
• Gage R&R Before Machine Acceptance: Is the Measurement System Fit for the Decision?English